ANALISIS PENGENDALIAN KUALITAS PRODUK KNOB 30VYG508-206^V DENGAN METODE SEVEN TOOLS DI PT. XYZ
Keywords:
Product Quality Control, Seven ToolsAbstract
The current industrial development makes companies compete to maintain and improve the quality of their products. This research is aimed at identifying the causes of defects, as well as reducing defective products and providing alternative repair proposals. This study uses the help of the seven tools method to analyze data. The data used for research needs is a production report that contains information on the number of products and the number of defective products in the period July 2023 – June 2024. The results obtained in this study are known to have three types of defects in Knob 30VYG508-206^V products, namely Spots, Bubbles, and Burries. From the results of the Pareto diagram, it can be seen that Bubrry's defect is the most dominant type of defect with 34%. Some of the factors that cause defects based on fishbone diagrams are human, machine, and method factors. The proposals given in this study are the procurement of training for employees, to the formulation of SOPs that regulate the manufacturing process and standards for the production of Knob 30VYG508-206^V products in detail.
Downloads
References
Abdel-Hamid, M. (2019). Improving the Construction Industry Quality Using the Seven Basic Quality Control Tools. Journal of Minerals and Materials Characterization and Engineering, 412-420.
Alfabeta. Suharyanto, Herlina, R., & Mulyana, A. (2022). Metode Penelitian Kuantitatif, Kualitatif, dan R&D. Bandung: Analisis Pengendalian Kualitas Produk Waring Dengan Metode Seven Tools Di Cv. Kas Sumedang.
Ardiel Shuttlecock. Lim, S. (2015). Quality improvement strategy to defect reduction with seven tools method: Case in food field company in Indonesia.
Benny, J. (2013). Ekspor Impor dan Pengaruhnya Terhadap Cadangan Devisa Indonesia. E-Jurnal Ekonomi Pembangunan Universitas Sam Ratulangi Manado, Vol.1 No.4 : 1406-1415.
Bungin, & Burhan. (2021). Analisa Data Penelitian Kualitatif. Edisi Keitga Jakarta: Prenada Media Group. Feriyanto, A. (2015).
Calyptra: Jurnal Ilmiah Mahasiswa Universitas Surabaya Vol.6 No.2, 1329-1345. Haryanto, I. I. (2019). Penerapan Metode SQC (Statistical Quality Control) Penerapan Metode SQC (Statistical Quality Control) UD.
Ginting, R. (2020) Perdagangan Internasional “Kupas Tuntas Prosedur Ekspor Impor. Yogyakarta: PT. Pustaka Baru.
Handoko, A. (2017). Production quality control with new seven tools for defect minimizationon PT. Dirgantara Indonesia. IOP Conference Series: Earth and Environmental Science, 452.
Hazmi, F.W., Kartiningsih, P.D., & Suprianto, H. 2012. Penerapan Lean Manufacturing untuk Meredukasi Waste di PT ARISU. Jurnal Teknik, (Pengawasan et al. 2006) Analisis pengawasan kualitas produk
Heizer, J., & Render, B. (2009). Manajement Operasi, Jakarta: Salemba Empat.
Neyestani, B. (2017) International Business Management 9, 445-450. Nasution, M. (2015). Manajemen Mutu Terpadu (Total Quality Management). Jakarta: Ghalia Indonesia.
Nurholiq, Adita, Oyon Saryono, and Iwan Setiawan. 2019. “Analisis Pengendalian Kualitas (Quality Control) Dalam Meningkatkan Kualitas Produk.”Jurnal Ekonologi 6(2): 393-99 https://jurnal.unigal.ac.id/index.php/ekonologi/article/donwload/2983/2644.
Prabaswari, A. D. (2020) Seven Basic Tools of Quality Control: TheAppropriate Techniques for Solving QualityProblems in the Organizations.
Sanny, L. (2015) Analysis of quality control of chippendale furniture (case study of PT. Bothwell Indonesia). IOP Conference Series: Materials Science and Engineering. NO 83.
Sari, M. (2016) Analisis Kecacatan Produk Fillet Skin On Red Mullet Dengan The Basic Seven Tools Of Quality Dan Usulan Perbaikannya Menggunakan Metode Fmea (Failure Modes And Effect Analysis) Pada PT. Holi Mina Jaya. Jurnal Manajemen Teori dan Terapan Tahun 8. No. 1, 9-22.
Sheriff, A. (2017) Faktor Penyebab Irregularities Penanganan Operasional Pesawat Medical Evacuation Di Bandara Halim Perdanakusuma.
Sugiyono. (2017) Implementation Of Seven Tools Of Quality In Educational Arena: A Case Study. International Journal of Mechanical Engineering and Technology (IJMET), 882-890.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Indra Gumelar, Rizki Fitria Annisa, Agung Widarman, Iman Thoriq
This work is licensed under a Creative Commons Attribution 4.0 International License.
